Safety Meterials

Head Protection

Hazard: Serious head injuries can result from blows to the head.

Solution:

Be sure that workers wear hard hats where there is a potential for objects falling from above, bumps to their heads from fixed objects, or accidental head contact with electrical hazards.
Construction Worker

Safety Checklists
The following checklists may help you take steps to avoid hazards that cause injuries, illnesses and fatalities. As always, be cautious and seek help if you are concerned about a potential hazard.

Personal Protective Equipment (PPE)
Eye and Face Protection

Safety glasses or face shields are worn anytime work operations can cause foreign objects getting into the eye such as during welding, cutting, grinding, nailing (or when working with concrete and/or harmful chemicals or when exposed to flying particles).
Eye and face protectors are selected based on anticipated hazards.
Safety glasses or face shields are worn when exposed to any electrical hazards including work on energized electrical systems.
Foot Protection

Construction workers should wear work shoes or boots with slip-resistant and puncture-resistant soles.
Safety-toed footwear is worn to prevent crushed toes when working around heavy equipment or falling objects.
Hand Protection

Gloves should fit snugly.
Workers wear the right gloves for the job (for example, heavy-duty rubber gloves for concrete work, welding gloves for welding, insulated gloves and sleeves when exposed to electrical hazards).
Head Protection

Workers shall wear hard hats where there is a potential for objects falling from above, bumps to their heads from fixed objects, or of accidental head contact with electrical hazards.
Hard hats are routinely inspected for dents, cracks or deterioration.
Hard hats are replaced after a heavy blow or electrical shock.
Hard hats are maintained in good condition.